Updated:
September 16, 2006
Paxton Enterprises
|
Wireless Probe Drive Alarm
Item # WPDA-1000
3000' Range
$288
- The wireless probe drive alarm combines the best
features of the wireless motion drive alarm and the hard-wired vehicle sensor
drive alarm in an easy to install package. The wireless probe drive
alarm is easy to install and will not give false signals from large animals
such as deer. The radio operated system consists of two parts - a
transmitter and a receiver with one whistle.
The receiver can be located in the house and plugged into a standard wall
outlet. The weatherproof outside transmitter, operated by a 9-volt
batter, should be located in the area of the driveway. The probe is
attached to the transmitter with 80 feet of direct burial cable and should be
buried alongside the drive with the transmitter mounted on a tree or post
about 4 feet high. The probe will detect the movement of a metal object
such as a car coming up a driveway. The transmitter will then send a
radio signal up to 3000 feet back to the receiver to sound a whistle for about
3 seconds. If you do not want the whistle to sound, the receiver is
equipped with an on-off switch.
Add-on Utilities for the
Wireless Probe Drive Alarm
Extra Transmitter for WPDAItem
#WPDA-T.......3000' Range.......$219
Extra wireless transmitters can be used in other locations; for example, 2 driveways
Extra Receiver for WPDAItem
#3............$89
The Receivers can be placed in other buildings or locations, and will ring at the same time. Each receiver comes standard with 1
whistle.
Add-ons (Bells, Sirens, Light Controls, etc.)
More Add-ons
|